STM32L431CBT6 80MHz Cortex-M4 Ultra-Low-Power MCU 128KB Flash 64KB SRAM LQFP-48 1.71-3.6V -40°C to +125°C

Features

• Ultra-low-power with FlexPowerControl

– 1.71 V to 3.6 V power supply

–-40 °C to 85/105/125 °C temperature range

– 200 nA in VBAT mode: supply for RTC and 32x32-bit backup registers

– 8 nA Shutdown mode (5 wakeup pins)

– 28 nA Standby mode (5 wakeup pins)

– 280 nA Standby mode with RTC

– 1.0 µA Stop 2 mode, 1.28 µA with RTC

– 84 µA/MHz run mode

– Batch acquisition mode (BAM)

– 4 µs wakeup from Stop mode

– Brown out reset (BOR)

– Interconnect matrix

• Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait-state execution from Flash memory, frequency up to 80 MHz, MPU, 100DMIPS and DSP instructions

• Performance benchmark

– 1.25 DMIPS/MHz (Drystone 2.1)

– 273.55 CoreMark® (3.42 CoreMark/MHz @ 80 MHz)

• Energy benchmark

– 176.7 ULPBench® score

• Clock Sources

– 4 to 48 MHz crystal oscillator

– 32 kHz crystal oscillator for RTC (LSE)

– Internal 16 MHz factory-trimmed RC (±1%)

– Internal low-power 32 kHz RC (±5%)

– Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25 % accuracy)

– Internal 48 MHz with clock recovery

– 2 PLLs for system clock, audio, ADC

• Up to 83 fast I/Os, most 5 V-tolerant WLCSP49

• RTC with HW calendar, alarms and calibration

• Up to 21 capacitive sensing channels: support touchkey, linear and rotary touch sensors

• 11x timers: 1x 16-bit advanced motor-control, 1x 32-bit and 2x 16-bit general purpose, 2x 16 bit basic, 2x low-power 16-bit timers (available in Stop mode), 2x watchdogs, SysTick timer

• Memories

– Up to 256 KB single bank Flash, proprietary code readout protection

– 64 KB of SRAM including 16 KB with hardware parity check

– Quad SPI memory interface

• Rich analog peripherals (independent supply)

– 1x 12-bit ADC 5 Msps, up to 16-bit with hardware oversampling, 200 µA/Msps

– 2x 12-bit DAC output channels, low-power sample and hold

– 1x operational amplifier with built-in PGA

– 2x ultra-low-power comparators

• 16x communication interfaces

– 1x SAI (serial audio interface)

– 3x I2C FM+(1 Mbit/s), SMBus/PMBus

– 4x USARTs (ISO 7816, LIN, IrDA, modem)

– 1x LPUART (Stop 2 wake-up)

– 3x SPIs (and 1x Quad SPI)

– CAN (2.0B Active) and SDMMC interface

– SWPMI single wire protocol master I/F

– IRTIM (Infrared interface)

• 14-channel DMA controller

• True random number generator

• CRC calculation unit, 96-bit unique ID

Description

The STM32L431xx devices are the ultra-low-power microcontrollers based on the high performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 80 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

The STM32L431xx devices embed high-speed memories (Flash memory up to 256 Kbyte, 64 Kbyte of SRAM), a Quad SPI flash memories interface (available on all packages) and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.

The STM32L431xx devices embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, proprietary code readout protection and Firewall.

The devices offer a fast 12-bit ADC (5 Msps), two comparators, one operational amplifier, two DAC channels, an internal voltage reference buffer, a low-power RTC, one general purpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, four general-purpose 16-bit timers, and two 16-bit low-power timers.

In addition, up to 21 capacitive sensing channels are available

They also feature standard and advanced communication interfaces.

• Three I2Cs

• Three SPIs

• Three USARTs and one Low-Power UART.

• One SAI (Serial Audio Interfaces)

• One SDMMC

• One CAN

• One SWPMI (Single Wire Protocol Master Interface)

The STM32L431xx operates in the -40 to +85 °C (+105 °C junction), -40 to +105 °C (+125 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low power applications.

Some independent power supplies are supported: analog independent supply input for ADC, DAC, OPAMP and comparators. A VBAT input allows to backup the RTC and backup registers.

The STM32L431xx family offers nine packages from 32 to 100-pin packages.

INFORMATION

Drawing

Our advantage :

• High quality products --- our offers are 100% new and original, ROHS
• Competitive price --- good Purchase channels with good price.
• Professional service --- strict quality testing before the shipment, and perfect after-sales service after the purchase.
• Adequate inventory --- With the support of our strong Purchasing team,
• Fast delivery --- we will ship the goods within 1-3 working days after the payment confirmed.

be sure to meet your need for all kinds of components. ^_^


Product List
Supply a Series of Electronic Components, full range of semiconductors, active & passive Components.We can help you to get all for bom of the PCB,IN a word, you can get one-stop solution here,


The offers including:
Integrated Circuit, Memory ICs, Diode, Transistor , Capacitor, Resistor, Varistor, Fuse, Trimmer & Potentiometer, Transformer, Battery, Cable, Relay, Switch, Connector, Terminal Block, Crystal & Oscillator, Inductor, Sensor, Transformer, IGBT Driver, LED,LCD, Convertor, PCB (Printed Circuit Board),PCBA (PCB Assembly)

Strong in Brand:
Microchip, MAX, AD, TI, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc

Thank you for your time to know our company and lean our production.

TOP Electronic Industry co., Ltd  was established in 2006. After 10 years effort and development, now we have become one of the leading electronic components distributors in China. We keep very kind relationship with our suppliers and partners, and put our customers in the first place always.

Here we can offer one-stop solution service:  from PCB design, production to PCB assembly, from a series of components offer to the BOM list.

In addition to its component supply service, TOP distributes industry respected communication modules(GPS,GSM/GPRS,3G,LTE 4G modules) and accessories. All the brands are very famous and welcome by the customers all over the world, they are including: Sierra Wireless, SIMCOM, CINTERION, U-BLOX, HUAWEI, ZTE,TELIT, HOLUX etc. competitive price, Adequate  inventory, fast delivery, be praised by all the customers .

As an innovative company, TOP supplies and  markets high-quality wireless communication antennas and RF-cables. to work with modules together. With more than 8 years antenna experience, we win a lot of stable customers from more than 50 countries. In order to save the cost and delivery time, control the quality, supply the competitive price for our customers, we built our own antenna factory in 2012,which is for developing and manufacturing GPS antenna, GSM/GPRS antenna, WIFI antenna, LTE antenna, all kinds of combo antennas etc. Quality, stability,  accessibility are all important to us.

 The third production-line is Supply a Series of Electronic Components, including Integrated Circuits, Transistor, Diode, LED, LCD display, Capacitor, Resistor, Inductor, Relay, Crystal , Terminal block ,pin header etc.

Our Strong in Brand including Microchip, MAX, AD, TI, NXP, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc

As a global distributor of electronic components, we stocking the world's widest range products of semiconductor and electronic components. You can get one stop service here include BOM(bill of material)  purchasing, testing, design for your project. Our experienced team is providing the most excellent service to meet your needs and satisfaction.

With rich experience on wireless product and electronic components, we win our customers with good quality and competitive price. We only offer the products 100% original from the factory.

 TOP has never stop going forward, we always want to give our customers best service. in 2013, together with our partners, we built another PCB factory. In this factory, we can make design, supply PCB, make PCB SMT and DIP assembly, offer BOM service. As a professional supplier , We have a strong procurement team and are therefore able to provide customers with competitive prices and good quality. This is our advantage to you.

As they are to you. Just as in our name, TOP strives to be a leading business in the electronic industry. Our high quality products and professional service, are sure to meet your need for all kinds of electronic components.

You are searching for creditable and professional supplier to work with; we are also looking for sincerely and long-term customers. Once we find each other, we could make rapid progress together!