MSP430G2553IPW28R: 16MHz 16-bit Ultra-Low-Power MCU with 16KB Flash, 512B RAM, 10-bit ADC, Timer, UART/SPI/I2C, On-chip Emulation andamp; Extended Temp Range for Embedded Systems

andnbsp;

FEATURES

andbull; LowSupply-Voltage Range: 1.8 V to 3.6 V

andbull; Ultra-Low Power Consumption

andnbsp; andndash; Active Mode: 230 andmicro;A at 1 MHz, 2.2 V

andnbsp; andndash; Standby Mode: 0.5 andmicro;A

andnbsp; andndash; Off Mode (RAM Retention): 0.1 andmicro;A

andbull; Five Power-Saving Modes

andbull; Ultra-Fast Wake-Up From Standby Mode in Less Than 1 andmicro;s

andbull; 16-Bit RISC Architecture, 62.5-ns Instruction Cycle Time

andbull; Basic Clock Module Configurations

andnbsp; andndash; Internal Frequencies up to 16 MHz With Four Calibrated Frequency

andnbsp; andndash; Internal Very-Low-Power Low-Frequency (LF) Oscillator

andnbsp; andndash; 32-kHz Crystal

andnbsp; andndash; External Digital Clock Source

andbull; Two16-Bit Timer_A With Three Capture/Compare Registers

andbull; Upto24Capacitive-Touch Enabled I/O Pins

andbull; Universal Serial Communication Interface (USCI)

andnbsp; andndash; Enhanced UART Supporting Auto Baudrate Detection (LIN)

andnbsp; andndash; IrDA Encoder and Decoder

andnbsp; andndash; Synchronous SPI

andnbsp; andndash; Iandsup2;Candtrade;

andbull; On-Chip Comparator for Analog Signal Compare Function or Slope Analog-to-Digital (A/D) Conversion

andbull; 10-Bit 200-ksps Analog-to-Digital (A/D) Converter With Internal Reference, Sample and-Hold, and Autoscan (See Table 1)

andbull; Brownout Detector

andbull; Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse

andbull; On-Chip Emulation Logic With Spy-Bi-Wire Interface

andbull; Family Members are Summarized in Table 1

andbull; Package Optionsandndash; TSSOP: 20 Pin, 28 Pinandndash; PDIP: 20 Pinandndash; QFN:32Pi

andnbsp;

Applications

1. Portable Medical and Health Monitoring Devices

Key Advantages Utilized: Ultra-low power (multiple low-power modes, e.g., LPM3/LPM4) extends battery life; the 10-bit ADC directly acquires analog sensor signals.

Typical Applications: Handheld pulse oximeters, digital thermometers, portable glucose meters, entry-level wearable health bands.

2. Consumer Electronics and Personal Portable Devices

Key Advantages Utilized: Small size (TSSOP-28) and low power consumption make it suitable for space- and power-constrained scenarios.

Typical Applications: Remote controls, electric toys, digital toothbrushes, basic smartwatches, portable gadgets.

3. Industrial Sensing and Control Systems

Key Advantages Utilized: Integrated ADC, timers, and communication interfaces (UART/SPI/I2C) connect and control various sensors; extended temperature range supports harsher environments.

Typical Applications: Sensor hubs, data loggers, flow meters, simple motor control, industrial remote controllers.

4. Smart Home and Automation

Key Advantages Utilized: Abundant I/Os and communication interfaces facilitate peripheral connectivity and control; ultra-low power suits battery-powered always-on devices.

Typical Applications: Smart locks, temperature/humidity sensor nodes, smart switches, alarms, garage door controllers.

5. IoT End Nodes

Key Advantages Utilized: Serves as a main controller for collecting sensor data and uploading via serial interfaces (e.g., Bluetooth/Wi-Fi modules); its low power consumption is a key advantage.

Typical Applications: Battery-powered wireless sensor nodes, environmental monitors, agricultural IoT sensors.

andnbsp;

DESCRIPTION

The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 andmicro;s.

The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16 bit timers, up to 24 I/O capacitive-touch enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface. In addition the MSP430G2x53 family members have a 10-bit analog-to-digital (A/D) converter. For configuration details see Table 1.

Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

andnbsp;

INFORMATION

andnbsp;

Drawing

Our advantage :phones, PDAand#39;s, notebook comput.ers

• High quality products --- our offers are 100% new and original, ROHS
• Competitive price --- good Purchase channels with good price.
• Professional service --- strict quality testing before the shipment, and perfect after-sales service after the purchase.
• Adequate inventory --- With the support of our strong Purchasing team,
• Fast delivery --- we will ship the goods within 1-3 working days after the payment confirmed.

andnbsp;

be sure to meet your need for all kinds of components. ^_^


Product List
Supply a Series of Electronic Components, full range of semiconductors, active andamp; passive Components.We can help you to get all for bom of the PCB,IN a word, you can get one-stop solution here,


The offers including:
Integrated Circuit, Memory ICs, Diode, Transistor , Capacitor, Resistor, Varistor, Fuse, Trimmer andamp; Potentiometer, Transformer, Battery, Cable, Relay, Switch, Connector, Terminal Block, Crystal andamp; Oscillator, Inductor, Sensor, Transformer, IGBT Driver, LED,LCD, Convertor, PCB (Printed Circuit Board),PCBA (PCB Assembly)

Strong in Brand:
Microchip, MAX, AD, TI, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc

Thank you for your time to know our company and lean our production.

TOP Electronic Industry co., Ltdandnbsp; was established in 2006. After 10 years effort and development, now we have become one of the leading electronic components distributors in China. We keep very kind relationship with our suppliers and partners, and put our customers in the first place always.

Here we can offer one-stop solution service:andnbsp; from PCB design, production to PCB assembly, from a series of components offer to the BOM list.

andnbsp;

In addition to its component supply service, TOP distributes industry respected communication modules(GPS,GSM/GPRS,3G,LTE 4G modules) and accessories. All the brands are very famous and welcome by the customers all over the world, they are including: Sierra Wireless, SIMCOM, CINTERION, U-BLOX, HUAWEI, ZTE,TELIT, HOLUX etc. competitive price, Adequate andnbsp;inventory, fast delivery, be praised by all the customers .

As an innovative company, TOP supplies and andnbsp;markets high-quality wireless communication antennas and RF-cables. to work with modules together. With more than 8 years antenna experience, we win a lot of stable customers from more than 50 countries. In order to save the cost and delivery time, control the quality, supply the competitive price for our customers, we built our own antenna factory in 2012,which is for developing and manufacturing GPS antenna, GSM/GPRS antenna, WIFI antenna, LTE antenna, all kinds of combo antennas etc. Quality, stability,andnbsp; accessibility are all important to us.

andnbsp;

andnbsp;The third production-line is Supply a Series of Electronic Components, including Integrated Circuits, Transistor, Diode, LED, LCD display, Capacitor, Resistor, Inductor, Relay, Crystal , Terminal block ,pin header etc.

Our Strong in Brand including Microchip, MAX, AD, TI, NXP, ATMEL, ST, ON, NS, Intersil, Winbond, Vishay, ISSI, Infineon, NEC, FAIRCHILD, OMRON,YAGEO, TDK, etc

As a global distributor of electronic components, we stocking the worldand#39;s widest range products of semiconductor and electronic components. You can get one stop service here include BOM(bill of material) andnbsp;purchasing, testing, design for your project. Our experienced team is providing the most excellent service to meet your needs and satisfaction.

With rich experience on wireless product and electronic components, we win our customers with good quality and competitive price. We only offer the products 100% original from the factory.

andnbsp;

andnbsp;

andnbsp;TOP has never stop going forward, we always want to give our customers best service. in 2013, together with our partners, we built another PCB factory. In this factory, we can make design, supply PCB, make PCB SMT and DIP assembly, offer BOM service. As a professional supplier , We have a strong procurement team and are therefore able to provide customers with competitive prices and good quality. This is our advantage to you.

andnbsp;

As they are to you. Just as in our name, TOP strives to be a leading business in the electronic industry. Our high quality products and professional service, are sure to meet your need for all kinds of electronic components.

andnbsp;

You are searching for creditable and professional supplier to work with; we are also looking for sincerely and long-term customers. Once we find each other, we could make rapid progress together!